door dom » ma 14 nov 2011, 19:18
Nasty sprak:
A paper clip bent into a 'U' shape is what i used, make sure the lengths are the same as you need to plug each one into the yellow plug at the same time to complete a circuit.
It is a yellow connector with two wires in it that is plugged into the fuse box, unplug it and pull it down. Once you have done that you can begin the process of erasing the memory.
NOTE: This will only reset your SRS System if what caused it to trigger has been fixed!
Ex: turning the ignition on with any SRS Plugs disconnected, such as pulling your seat out.
1st Turn the ignition off and push the paperclip to the plug (one prong in each hole).
2nd Turn Ignition on. SRS indicator light will come on for about 6 seconds then go out.
3rd Pull the paperclip out of the plug within 4 seconds of SRS indicator light going off. SRS indicator light will come on again.
4th Put the paperclip back into the plug within 4 seconds of SRS light coming back on. SRS indicator light will go off.
5th Pull out the paperclip from the plug within 4 seconds. SRS indicator light will indicate that memory is erased by blinking 2 times.
6th Turn ignition off, and wait 10 seconds. Start vehicle like normal and light should come on and go out like normal. You have reset your SRS light, congrats.
If it does not work the first time try it again, the timing has to be perfect.